Sensitive Dual Switch

BJ-105

Open all sections
Print user manual

In order to ensure the safe operation of the device it is recommended to read this user manual completely before starting to use the device.

  • 2 output 3,5 mm connector
  • Cable length: 1,7 m
  • Size: 60x57x26 mm
  • Wand length: 4,5cm *
  • Head ball diameter: 1,2cm *
  • Fixing screw:: ¼ inch, Whitworth thread

* Rods and balls of different sizes can be provided under custom manufacturing.

BJ Sensitive Dual Switch is small, sensitive wand and a dual sensor that allows the device to detect two movement directions.

This switch is especially suited to be used with tongue, lips, chin or cheek. As it is designed to be operated with the minimum effort and very short move, it can be operated with other parts of the body.

This switch is compatible with all devices with one or two switch inputs for 3,5mm.

Set the switch in the appropriate position near the part of the body that will activate it. If you want to use it as a double switch it should be mounted in order to be activated in both directions. The switch can be installed in any direction and orientation.

  • Tryto avoidover pressureonthe operating rod, asthisswitchis designedtocapturesmallmovementswith greatsensitivity.
  • Takeprecautionstopreventtherod being accidentally introducedin the
  • Do notpull strongly onthewires.
  • Holdtheswitch firmly toitssupport,toensure a proper performance.
  • At the end of the product’s useful life neither the product nor its electronic accessories can be eliminated together with other domestic waste.
  • To avoid possible environmental or human harm which could be caused by uncontrolled waste disposal, separate these products from other types of waste and correctly recycle them. This will promote the sustainable reuse of material resources.
  • Consumers can contact the establishment where they purchased the product or the relevant local authorities in order to obtain more information about how and where they can be ecologically and safely recycled.

Within the statutory warranty period we undertake to rectify free of charge by repair or replacement any product defects arising from material or production faults.

Any unauthorized tampering with, or modifications to the product will annul this warranty.

If, despite of correct handling, faults or malfunctions occur or if the product was damaged, please contact us at the address below:

Qinera
c/ Pacífic 51
08027 Barcelona, Spain
Phone: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@qinera.com
web: http://www.qinera.com