Detachable and adjustable wheelchair mount

BJ-605

Open all sections
Print user manual

In order to ensure the safe operation of the device it is recommended to read this user manual completely before starting to use the device.

1.1

Mounting the plate and bracket

Fig. 1. Mounting the plate and bracket.

1.2

Mounting the plate and bracket on the tube

Fig. 2. Mounting the plate and bracket on the tube.

Disposition of the plate on the tube

Fig. 3. Disposition of the plate on the tube.

 

Mounting the bracket in horizontal position

Fig. 4. Mounting the bracket in horizontal position.

 

Mounting the bracket in vertical position

Fig. 5. Mounting the bracket in vertical position.

 

 

 

Mounting the clamping arm in horizontal position

Fig. 6. Mounting the clamping arm in horizontal position.

 

Mounting the clamping arm in vertical position

Fig. 7. Mounting the clamping arm in vertical position.

 

 

Orientation of the clamping arm

Fig.8. Orientation of the clamping arm.

Esta pieza permite acoplar el tubo del brazo a la base que se montó en el paso anterior.


  1. Mounting the tube clamping ring

    Fig. 9. Mounting the tube clamping ring.

     


  2. Tube insertion inside the ring

    Fig. 10. Tube insertion inside the ring.

     


  3. Global orientation of the tube assembly

    Fig. 11. Global orientation of the tube assembly.

     


This system has been designed for an easy use after installation. For detaching the mounting system simply raise the tube assembly (Fig. 12). For returning the system to the wheelchair, insert the tube assembly and ensure the correct orientation (Fig 13). The tube will have exactly the same position as when it was installed for the first time. There’s no need to make further adjustments.

Removing the tube and the tray

Fig. 12. Removing the tube and the tray.

 

Inserting the tube and the tray

Fig. 13. Inserting the tube and the tray.

 

If you need to put the tray away, so as not to disturb the user, do not need to remove it completely; simply raise the tube assembly and rotate the tray 90 degrees until the ring again matches the holes of the base (fig. 14).

Rotation of the tray

Fig. 14. Rotation of the tray

 

The tube can be rotated 90º providing 4 different positions of the tray (fig 15).

Repositioning the tray

Fig. 15. Repositioning the tray.

 

Once the mounting system is in the use position, it can be locked using the provided key (fig. 16). This key allows locking the tube, preventing the arm can move. There’s no need to tighten the key strongly because a small pressure allows the locking

Locking the system with the key

Fig. 16. Locking the system with the key.

  • To avoid possible environmental or human harm which could be caused by uncontrolled waste disposal, separate these products from other types of waste and correctly recycle them. This will promote the sustainable reuse of material resources.
  • Consumers can contact the establishment where they purchased the product or the relevant local authorities in order to obtain more information about how and where they can be ecologically and safely recycled.

Within the statutory warranty period we undertake to rectify free of charge by repair or replacement any product defects arising from material or production faults.

Any unauthorized tampering with, or modifications to the product will annul this warranty.

If, despite of correct handling, faults or malfunctions occur or if the product was damaged, please contact us at the address below:

Qinera
c/ Pacífic 51
08027 Barcelona, Spain
Phone: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@qinera.com
web: http://www.qinera.com