SHX Fireball

BJ-EX410

Open all sections
Print user manual
  • To ensure the safe operation of the device it’s recommended to read this manual before starting to use the device.
  • It is recommended a periodic inspection of the device, in case of detecting any anomaly, contact immediately BJLive! for assistance.
  • The correct and supervised use of this equipment will guarantee a long term use.
  • The product should always be used under adult supervision.
  • Install both the power unit and the bulb at a minimum distance of 0.5m away from any flammable element.
  • Power 240V (AC) 50 / 60Hz
  • Power 20W
  • LED Colors Red, Green, Blue, Amber, White
  • LED Power 3W 
  • Quantity of LEDs 6
  • Dimensions 190 × 190 × 155

Introduction

Light up this powerful ball of colored lights from any SHX scene and transform your room into a disco. This effect will fill the walls with a thousand revolving lights.

Components

             Fireball

             BJ-234 Enabler Socket+

For the pre-installation of the product you will need:

  • Power socket 230V -50Hz

Unpack the product conveniently.

If you find any damage or lack of material when unpacking, please contact BJLive!. It is recommended to keep the boxes for the duration of the guarantee period in case it is necessary to reuse it again.

Necessary elements for assembly:

For the assembly of the device you will need the following items (not included with the product):

  • 2x screw with cylindrical head (minimum diameter 4.5mm)
  • 2x fixing plate on the wall. Make sure the plugs are appropiate for the mounting surface.

Mounting:

Step  1. Power the device

Before connecting the power adapter, check if the Socket + is properly configured. The position of the wheels of the receiver must be:

  • Plug the power supply to the Socket +.
  • Connect the Socket + device to the wall plug.

STEP 2. check operating mode

Check if the operating mode (“Control mode”) is correctly set to the “Auto” position.

              

  • Connect the devices to the Socket +.
  • Connect the Socket + to a power outlet.
  • It’s possible to connect a switch on the Socket + device’s switch input to control the system directly.


Start the system can be done from the SHX application or through a switch, using the SHX application use the predefined configuration of the Fireball

With the default configuration delivered, when activating the devices, this will change its previous state.

To activate the fan from the SHX application, you can go to the “Control” tab of the SHX application:

IMPORTANT: For the correct functioning of the device, the blue wheel of the Socket + device must be in position 1.

To control the system, the configuration of the device it’s already inluded in the SHX application.

The control of the system is transmitted by radiofrequency. The codes associated to the different functions of the system control are:

  • Code 29: activate / deactivate system
  • Code 59: deactivate system
  • Code 75: activate system

The configuration parameters of the system are:

  • Clean the surface of the Fireball on a regular basis to maintain a good functioning of the device.
  • To clean it, disconnect it from the power socket first.
  • During operation, the housing becomes hot. Do not touch it during operation or immediately afterwards.
  • Clean using soapy water and a soft cloth (wrung out).
    Never use chemical or abrasive products for cleaning.
  • Carefully dry the surface and do not feed until after one hour.
  • Periodically check the product, in case of detecting any anomaly, contact BJ Adaptations immediately for assistance.

TheSHX Fireball doesn’t turn on:

In the event of Fireball not working, check the following steps:

IMPORTANT: check if the operating mode is in the AUTO position.

What is the mounting position?

The SHX Fireball can be mounted on the floor, on walls or on the ceiling.

Electrical products should not be disposed of with household waste

  • Dispose of the product at an electronic waste collection point or your specialist distributor. 
  • Place the packaging material in the cardboard, paper and plastic recycling bins.
  • To avoid possible damage to the environment or human health that represents the elimination of this kind of waste, separate these products from other types of waste and reciprocally correct. In this way, the sustainable reuse of material resources will be promoted.
  • Private users can contact the establishment where they purchased the product or the relevant local authorities to find out how and where they can take it to an ecological and safe recycling.
  • Within the term of legal guarantee we undertake to rectify for free by means of repair or replacement the defects of the product derived from defective materials or manufacturing defects.
  • Any unauthorised alteration or modification of the product will void this warranty.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with the requirements indicated in the European Directive 2004/108 / EC.

If you find any damage or any material is missing please contact our technical service for assistance.

Qinera

c/ Pacífic 51
08027 Barcelona, Spain
Phone: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@qinera.com
web: http://www.qinera.com

Any damage or breakage caused during transport must be notified within three days of receipt.