SHX Lamp

BJ-EX50

Open all sections
Print user manual
  • It’s highly recommended to read this manual before start using the device.
  • The product should always be used under adult supervision.
  • This product is designed for indoor use only.
  • Be careful with the cables of the product. If you detect a defect in a cable, disconnect the device from the power supply and contact technical support.
  • The product is designed to create a visual and sensitive effect, so it should never be shaken, tipped or hit with hard objects.
  • Power supply ……………………… 240V(AC) –  50Hz to 12V(DC)
  • Measurements ……………………. 35 cm diameter y 140 cm high
  • DMX cabel length ……………….. 6m

This incredible lamp changes color in coordination with the SHX System. Its powerful, blurred light creates an effect that captures the attention and creates a very special ambiance.

As it is part of the SHX System, you can select the color of its light with any of the system controllers or it can change automatically depending on the image or video selected, or even voice signals. 

Lamp components

              Lamp

Power supply

    6m DMX cable 

  • A 230V socket must be available for the power supply of the device.
  • A DMX connection must be available for lighting control (female DMX connector).
  • In case of need to control more lighting elements, a second DMX connection must be provided to ensure continuity to the signal (male DMX connector).

CAUTION: Place the lamp on a flat surface. The device may lose stability, not knock over.

Then connect the power cable of the device.

DMX bus

  • For use with the SHX system, the DMX cable must be connected to the DMX IN connector. This cable must be connected to the rest of the DMX bus of the installation. In the event that this element is the last of the entire installation, the bus terminator should be connected to the DMX OUT (this terminator is supplied in the SHX Central Device). If you must continue the DMX signal to another device, you must connect the DMX cable to the DMX out connector.

 
The configurations of the device are fixed, and are programmed from the factory

Before start using the device
Check the following points:

  • The device must be connected to a wall plug.
  • The DMX cable must be connected to the device.
  • The SHX Central device must be switched on.

Use of the product

  • In the SHX software you can control the lights of the device.
  • In the SHX app, you will also find a tab that allows you to change the colors of the device: you can choose between different colors or activate the function of automatic color changes.

  • In the SHX application there’s a power off button, you can turn off the device with it.
  • You can configure the different contents of the SHX application as well, to create the effects you want to associate with that content. See the manual of the SHX application to learn how to create these contents, (automatic mode, according to the SHX scenes, by sound, simultaneous with the other elements or independent)

The control of this device has been added to the SHX application.
The configuration parameters for this device are:

Lighting control:

  • DMX address: 321

In the SHX application it has been created within the DMX devices with the following configuration:

  • Disconnect the device from the electrical power before cleaning.
  • Use a soft cloth moistened in soapy water to clean the product.
  • Do not use abrasive products.
  • Dry the product before connecting it to the wall socket again.
  • Do not connect it if liquid has entered inside the device.
  • Don’t cover the ventilation of the lightsource, and keep them clean to avoid overheating.
  • For a basic troubleshooting of DMX devices follow the next steps:

  • When a DMX device is affecting the well functioning of other devices on the DMX bus, follow the next steps to identify wheater if a device is faulty or the issue is related to the cable used to connect all the devices.

 

  • To avoid possible damage to the environment or human health that represents the uncontrolled disposal of waste, separate these products from other types of waste and recycle them correctly. In this way, the sustainable reuse of material resources is promoted

  • Private users can contact the establishment where they purchased the product or with the relevant local authorities to find out how and where they can take it to be subjected to environmentally friendly and safe recycling.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with EU 2004/108/EC Directive requirements .

Declaration of conformity can be downloaded by clicking on the following link: bjliveat.com

If you find any damage or any material is missing please contact our technical service for assistance.

Qinera

c/ Pacífic 51
08027 Barcelona, Spain
Phone: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@qinera.com
web: http://www.qinera.com

Any damage or breakage caused during transport must be notified within three days of receipt.