SHX Planet

BJ-EX42

Open all sections
Print user manual
  • It’s highly recommended to read this manual before start using the device.
  • The product should always be used under adult supervision.
  • DO NOT cover the ventilation holes.
  • To avoid eye damage, do not look directly at the lens of the light source.
  • This product is designed for indoor use only.
  • People prone to epileptic seizures should consider the effects of this  lights effect can have on them.
  • Be careful with the cables of the product. If you detect a defect in a cable, disconnect the device from the power supply and contact technical support.
  • The product is designed to create a visual and sensitive effect, so it should never be shaken, tipped or hit with hard objects.

Especificaciones de Planeta SHX

  • Power Supply …………………. 240V(AC) 50Hz to 12V(DC)
  • Dimensions ……………………  Ø 50 cm
  • Weight ………………………….. 3Kgr
  • DMX cable length …………… 6m

Description:

This large luminous sphere is a very attractive resource for hanging from the ceiling or placed on the floor.

Compatible with the SHX System.

Planet components

     Planet

         Power supply

       DMX cable

  • A 230V socket must be available for the power supply of the device.
  • A DMX connection must be available for lighting control (female DMX connector).
  • In case of need to control more lighting elements, a second DMX connection must be provided to ensure continuity to the signal (male DMX connector).

The SHX planet can be used indistinctly on the floor or suspended from the ceiling, taking into account that a 220V (AC) power outlet must always be available to connect the device.

It is possible to hang the planet to the ceiling, it is always the responsibility of the installer to ensure that the structure of the roof or false ceiling supports the weight of the device up to 4 times.

Hang up planet

Necessary elements  for assembly:

For the assembly of the device you will need the following items (not included with the product):

  • 1x fixing wall (6mm). Make sure that the plugs are suitable for the mounting surface.
  • 1x closed eyebolt

For fixing it to the roof, there is an adjustable steel cable. For the suspension of the planet, the anchor point must be marked on the roof of the room and the screws must be installed to hang the planet. Depending on the height of the roof, the length of the steel cable must be adjusted. Once adjusted, all the flange nuts should be tightened tightly.

IMPORTANT: the flanges are pre-assembled, but they are not fixed permanently. Before hanging the shower they should be tightened and make sure they are firmly attached.

 

Mounting on the floor:

WARNING: Place the lamp on a flat surface. The device can lose stability, do not tip it over.

Then connect the power cord of the device.

 

DMX bus installation

Make the DMX connections: for use with the SHX system, the DMX cable must be connected to the DMX IN connector. This cable must be connected to the rest of the DMX bus of the installation. In the event that this element is the last of the entire installation, the bus terminator should be connected to the DMX OUT (this terminator is supplied in the SHX Central Device). If you must continue the DMX signal to another device, you must connect the DMX cable to the DMX out connector.

 
The configurations of the device are fixed, and are programmed from the factory

Before start using the device
Check the following points:

  • The device must be connected to a wall plug.
  • The DMX cable must be connected to the device.
  • The SHX Central device must be switched on.

Use of the product

  • In the SHX software you can control the lights of the device.
  • In the SHX app, you will also find a tab that allows you to change the colors of the device: you can choose between different colors or activate the function of automatic color changes.

  • In the SHX application there’s a power off button, you can turn off the device with it.
  • You can configure the different contents of the SHX application as well, to create the effects you want to associate with that content. See the manual of the SHX application to learn how to create these contents, (automatic mode, according to the SHX scenes, by sound, simultaneous with the other elements or independent)

The control of this device has been added to the SHX application.
The configuration parameters for this device are:

Lighting control:

  • DMX address: 256

In the SHX application it has been created within the DMX devices with the following configuration:

  • Disconnect the device from the electrical power before cleaning
  • Use a soft cloth moistened in soapy water to clean the product.
  • Do not use abrasive products.
  • Dry the product before connecting it to the current
  • Do not connect the device if liquid has entered inside
  • Don’t cover the ventilation of the lightsource, and keep them clean to avoid overheating
  • For a basic troubleshooting of DMX devices follow the next steps:

  • When a DMX device is affecting the well functioning of other devices on the DMX bus, follow the next steps to identify wheater if a device is faulty or the issue is related to the cable used to connect all the devices.

 

  • To avoid possible damage to the environment or human health that represents the uncontrolled disposal of waste, separate these products from other types of waste and recycle them correctly. In this way, the sustainable reuse of material resources is promoted

  • Private users can contact the establishment where they purchased the product or with the relevant local authorities to find out how and where they can take it to be subjected to environmentally friendly and safe recycling.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with EU 2004/108/EC Directive requirements .

Declaration of conformity can be downloaded by clicking on the following link: bjliveat.com

If you find any damage or any material is missing please contact our technical service for assistance.

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, España
Fono: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@bjliveat.com
www.bjliveat.com

Any damage or breakage caused during transport must be notified within three days of receipt.