UV LED Light

BJ-EIFUVL

Open all sections
Print user manual
  • It is necessary to read the entire manual before starting using the device.
  • The product should be always used under adult supervision.
  • Do not look directly to the LEDs, they can damage your sight.
  • Do not plug or unplug the device with wet hands.
  • To avoid fire or electric shocks, do not expose the device to rain or humidity.
  • To clean it, first disconnect it from the power socket.
  • Working voltage: 100 – 240AC; 50 / 60Hz
  • Working power: 20W
  • Dimensions: 180 x 175 x 114 mm
  • Weight: 1.1Kg

Introduction

Ultraviolet light allows to create special environments where the reflective elements stand out completely, facilitating attention and opening a new world of possibilities.

A powerful LED bulb emits ultraviolet light in a certain area and in a long-lasting way.

Components

UV LED light

For the pre-installation of the product you will need:

  • Power socket 230V -50Hz.

Unpack the product carefully.

If you find any damage or lack of material when unpacking, please contact BJLive!. It is recommended to keep the boxes during the period of warranty in case it’s be necessary to return it.

Necessary elements for assembly:

To fix the SHX UV LED light, you will need the following items (not included with the product):

  • 1x screw with cylindrical head (mini diameter 4.5mm)
  • 1x fixing wall.
  • 1x Wide-flanged washer.

 

Installation:

STEP 1. Mount the UV light

  • Mark the point where the focus should be fixed.
  • Make the holes and mount it the fixing block. Make sure the plug is appropiate for the mounting surface.
  • Fix the bulb with the fixing screw. Remember to put the washer between the screw and the bulb holder.

STEP 2. Connect the power adapter.

  • Connect the power cable to the wall plug.

  • Make sure that the device is set to “CLor”, if not, press the ‘MODE’ button until you see “CLor” 

  • Clean the lights regularly to maintain a good functioning condition of the device.
  • Before cleaning disconnect it from the power supply.
  • Clean using soapy water and a soft cloth (well wrung out). Never use chemical or abrasive products for cleaning.
  • Carefully dry the surface and do not feed until after one hour.

Can ultraviolet light be harmful?

The emission of ultraviolet light from this LED light is not harmful, althought it’s recommended to avoid direct eye contact and to kee`a safety distance from the light.

How far should the UV LED light be placed?

The recommended distance to the work at safeway is between 2 and 2.5m.

Which elements can be seen under ultraviolet light?

White elements and fluorescent colors are especially noticeable when working under UV light.

Electrical products should not be disposed of with household waste

  • Dispose of the product at an electronic waste collection point or your specialist distributor. 
  • Place the packaging material in the cardboard, paper and plastic recycling bins.
  • To avoid possible damage to the environment or human health that represents the elimination of this kind of waste, separate these products from other types of waste and reciprocally correct. In this way, the sustainable reuse of material resources will be promoted.
  • Private users can contact the establishment where they purchased the product or the relevant local authorities to find out how and where they can take it to an ecological and safe recycling.
  • Within the term of legal guarantee we undertake to rectify for free by means of repair or replacement the defects of the product derived from defective materials or manufacturing defects.
  • Any unauthorised alteration or modification of the product will void this warranty.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with the requirements indicated in the European Directive 2004/108 / EC.

If you find any damage or any material is missing please contact our technical service for assistance.

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, España
Fono: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@bjliveat.com
www.bjliveat.com

Any damage or breakage caused during transport must be notified within three days of receipt.