BJ Support » Spotlight

Safety warning

It’s highly recommended to read this manual before start using the device.
The product should always be used under adult supervision.
DO NOT cover the ventilation holes.
To avoid eye damage, do not look directly at the lens of the light source.
This product is designed for indoor use only.
People prone to epileptic seizures should consider the effects of this lights effect can have on them.
Be careful with the cables of the product. If you detect a defect in a cable, disconnect the device from the power supply and contact technical support.
The product is designed to create a visual and sensitive effect, so it should never be shaken, tipped or hit with hard objects.
During operation, the spotlight houing becomes hot. Do not touch it during operation or immediately afterwards.

Technical specifications

Power supply …………………….. 110∼240V AC 50/60Hz
Power ………………………………. 30W
Dimensions ……………………….. 220×220×325
Weight ……………………………… 2.8 Kg
DMX cable lenght ………………. 6m

Description

Introduction

The spotlight can illuminate a specific area of the room in the color of your choice.

Create themed environments like diving into the sea, spending a day on the beach or walking in the forest.

Make the lights change with the music or with your own voice. Compatible with the sensory SHX System.

Spotlight components

LED spotlight
6m DMX cable
230V cable

1. 2. 3.

Pre-Installation

A 230V socket must be provided for the power supply of the device.
A DMX connection must be provided for lighting control (female DMX connector).
In case of need to control more lighting elements, a second DMX connection must be provided to ensure continuity to the signal (male DMX connector).

If you find any damage or lack of material when unpacking, please contact BJliveat. It is recommended to keep the boxes for the duration of the guarantee period in case it is necessary to reuse it again.

Necessary elements for assembly:

For the assembly of the device you will need the following items not included with the product:

1x fixing wall (8mm). Make sure that the plugs are suitable for the mounting surface.
1x screw with cylindrical head
1x wide-flanged washer.

Assembly:

Make the hole at the point where you want to mount the bulb.
Fix the bulb with the screw and the wide-flange washer.

Connect the focus power cable.

DMX bus installation

Make the DMX connections: for use with the SHX system, the DMX cable must be connected to the DMX IN connector. This cable must be connected to the rest of the DMX bus of the installation. In the event that this element is the last of the entire installation, the bus terminator should be connected to the DMX OUT (this terminator is supplied in the SHX Central Device). If you must continue the DMX signal to another device, you must connect the DMX cable to the DMX out connector.

Startup

Spotlight

The Spotlight is delivered pre-configured to DMX function but in case it does not respond correctly to the SHX system, check that the configuration is correct

Using the previous scheme, we will check that the DMX address is correct:

Plug the Spotlight
The following will appear on the screen: dXXX (where each “X” is a number from 1 to 9), if what we see is d001, the configuration is correct.
If you have a different number: set the number that appears on the screen with the Up / Down arrows until you reach 001.
Once the address d0001 is set, press the OK button.

How to use

Before start using the device
Check the following points:

The device must be connected to a wall plug.
The DMX cable must be connected to the device.
The SHX Central device must be switched on.

Use of the product

In the SHX software you can control the lights of the device.
In the SHX app, you will also find a tab that allows you to change the colors of the device: you can choose between different colors or activate the function of automatic color changes.

In the SHX application there’s a power off button, you can turn off the device with it.
You can configure the different contents of the SHX application as well, to create the effects you want to associate with that content. See the manual of the SHX application to learn how to create these contents, (automatic mode, according to the SHX scenes, by sound, simultaneous with the other elements or independent)

Software configuration

The control of this device has been added to the SHX application.
The configuration parameters for this device are:

Lighting control:

DMX address: 001

In the SHX application it has been created within the DMX devices with the following configuration:

Maintenance

Disconnect the device from the electrical power before cleaning
Use a soft cloth moistened in soapy water to clean the product.
Do not use abrasive products.
Dry the product before connecting it to the current
Do not connect the device if liquid has entered inside
Don’t cover the ventilation of the lightsource, and keep them clean to avoid overheating

Troubleshooting

For a basic troubleshooting of DMX devices follow the next steps:

When a DMX device is affecting the well functioning of other devices on the DMX bus, follow the next steps to identify wheater if a device is faulty or the issue is related to the cable used to connect all the devices.

FAQ's

Recycling

To avoid possible damage to the environment or human health that represents the uncontrolled disposal of waste, separate these products from other types of waste and recycle them correctly. In this way, the sustainable reuse of material resources is promoted
Private users can contact the establishment where they purchased the product or with the relevant local authorities to find out how and where they can take it to be subjected to environmentally friendly and safe recycling.

Any damage or breakage caused during transport must be notified within three days of receipt.

Spotlight