To ensure the safe operation of the device it is recommended to read this user manual completely before starting to use the device.

  • Power Supply 230~ / 50Hz
  • Maximum power supply 250V~
  • Dimensions 105x59x50 mm
  • 2 x switch 3.5 mm mono jack plug
  • Maximum load:
    • Resistive loads: 2000W/9A (cosφ=1)
    • Motor loads: 1000W/5,5A (cosφ=0,8)
    • Halogen lamps with transformer: 300W/1,7A (cosφ=0,76)
  • Maximum switch output charge: 24V – 1A

This device provides switch control of any electrical appliance.

Participation box

Fig. 1. Participation box.

To use the Participation Box you must follow the next steps:

  1. Plug the participation box into the wall socket, having in mind the technical specifications of the equipment.
  2. Connect the device you have chosen to participation box socket (fig.1), having in mind the technical specifications of the equipment and being sure it is in operating condition.
  3. Situate the function selector (fig.1) in the desired position according to the desired action (table 1).
  4. Connect a switch to the “switch input” (fig.1) and activate it.
  5. If you want, now you can control a switch adapted device while you activate the appliance connected to the Participation Box.

The switch output will work at the same time and in the same way as the appliance connected to the Participation Box. Connect the device to the “switch output” (fig.1) with the included cable and activate it.


The Enabler can be cleaned using a damp soft cloth. Always carry out this operation with the Enabler disconnected.

In the event of a fault in the Enabler, do not handle it and contact your distributor.

Waste electrical products should not be disposed of with household waste!

Dispose of the waste product via a collection point for electronic scrap or via your specialist dealer.

Put the packaging material into the recycling bins for cardboard, paper and plastics.

Within the statutory warranty period we undertake to rectify free of charge by repair or replacement any product defects arising from material or production faults.

Any unauthorized tampering with, or modifications to the product will annul this warranty.

This product complies with the European directives 2004/108/EC. The declaration of conformity can be consulted at the company’s web page.

The Declaration of Conformity can be downloaded at BJ-241_conformity.pdf

If, despite of correct handling, faults or malfunctions occur or if the product was damaged, please contact us at the address below:

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, Spain
Phone: +34 93 285 04 37
Fax: +34 93 553 56 34