It is necessary to read the entire manual before starting

  • Sizes (Width × Height × Background): 60 × 108 × 55 cm

This cabinet is used to house the SHX Rack and its accessories.

  • All necessary screws and fittings are included

  • You need a Phillips screwdriver and a drill with a bit for wood.

View of the cabinet with the fittings


Knobs: For door and drawers

1- Screw the knobs into the hole made on the 2x drawer fronts FONNES 803.859.23.

2- Screw the knobs into the hole made on the door FONNES 192.134.74


Door Lock.

1- Place the door lock into the hole made on the the door FONNES 192.134.74 



2- Screw the locking tab on the structure PLATSA 103.309.72


Assembly of the cabinet:

1- Assemble the furniture according to the instructions in the IKEA manuals

NOTE: please disregard the rear of the structure PLATSA103.309.72. We have included a back pannel with a window to acces the wiring to replace it.

2- Screw the wheels on the base module.

Clean using soapy water and a soft, damp cloth. Do not clean with harsh chemical or abrasive products. Dry the surface thoroughly.

  • At the end of the product’s useful life neither the product nor its electronic accessories (e.g. the USB cable) can be eliminated together with other domestic waste.
  • To avoid possible environmental or human harm which could be caused by uncontrolled waste disposal, separate these products from other types of waste and correctly recycle them. This will promote the sustainable reuse of material resources.
  • Consumers can contact the establishment where they purchased the product or the relevant local authorities in order to obtain more information about how and where they can be ecologically and safely recycled.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with EU 2004/108/EC Directive requirements .

Declaration of conformity can be downloaded by clicking on the following link:


If you find any damage or any material is missing please contact our technical service for assistance.

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, España
Fono: +34 93 285 04 37
Fax: +34 93 553 56 34

Any damage or breakage caused during transport must be notified within three days of receipt.